Doxbo

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Kodi ======

===== Distributions =====
  * OSMC: https://osmc.tv/
  * OpenELEC: http://openelec.tv/

===== Improve cache =====
https://kodi.wiki/view/HOW-TO:Modify_the_video_cache

Memory set to 100MB (300MB free RAM required):

<code>
<advancedsettings>
    <cache>
        <buffermode>1</buffermode>
        <memorysize>104857600</memorysize>
        <readfactor>10</readfactor>
    </cache>
</advancedsettings>
</code>

===== Player Info =====

Activate the view with: Control+Shift+O (that's the uppercase letter o).

Try the skin Rapier: https://kodi.wiki/view/Add-on:Rapier

  * https://forum.kodi.tv/showthread.php?tid=275260
  * https://forum.kodi.tv/showthread.php?tid=306112

===== Manual installation =====
  * http://michael.gorven.za.net/
  * https://www.raspberrypi.org/forums/viewtopic.php?t=99866
  * https://fynxer.wordpress.com/2015/03/29/installing-kodi-on-raspberry-pi-2-raspbian-wheezy/
  * http://drcobra.co.uk/?p=25

===== Repos =====
  * https://superrepo.org/get-started/
  * http://www.tvaddons.ag/install-addons-kodi/

===== Addons =====
  * [[https://seo-michael.co.uk/how-to-manually-install-sportsdevil-on-xbmc/|Deportes]] ([[http://forums.tvaddons.ag/threads/32238-SportsDevil-Latest-Plugin-info-and-Librtmp|mirror]])
  * LiveStreamsPro
    * http://ayuda.adryanlist.info/
  * p2p-streams
    * Go to Add-on settings -> General -> Activate **Download modules on boot** (it's on by default)
    * Go to Add-on settings -> Lists/Parsers -> Run a python script -> http://bit.ly/allparsers
    * When asked, select **OpenELEC** as the OS (even when using OSMC)
    * NOTE: Acestream does NOT work with raspberry pi
    * Will soon change name to plexus
  * pelisalacarta
  * [[http://forum.kodi.tv/showthread.php?tid=200957|Pulsar]] (better than Stream and XBMCtorrent)
    * Torrent2Pulsar
    * Pulsar MC's Provider Manager
    * Pulsar MC's Divxatope (Español) Provider
    * Pulsar MC's Divxtotal (Español) Provider
    * Pulsar MC's EliteTorrent (Español) Provider
    * Pulsar kickass multilanguage Provider
    * Pulsar MC's BTjunkie Provider
    * Pulsar MC's ExtraTorrent Provider
    * Pulsar MC's KickAss Provider
    * Pulsar MC's LimeTorrents Provider
    * Pulsar MC's RARBG Provider
    * Pulsar MC's SumoTorrent Provider
    * Pulsar MC's The Pirate Bay Provider
    * Pulsar MC's TorrentZ Provider
  * [[https://github.com/scakemyer/plugin.video.quasar|Quasar]] (fork of Pulsar, maintained)
  * Stream (fork of XBMCtorrent)
  * tvalacarta
  * TwitchTV
  * XBMCtorrent (abandoned)
  * YouTube

===== Skins =====
  * Aeon Nox
  * Amber
  * Maximinimalism
  * Genesis

===== Web interfaces =====
  * [[https://github.com/tuxfuxch/yarc|yarc]]

===== librtmp =====
To update the library **librtmp** download the newest version by RedPenguin from https://www.mediafire.com/?x4cvp5hl4m9xr (right now is inside the folder **3-16-15-Fixes/RasPi**).

The name of the downloaded file is **librtmp.so.0**, but has to replace the file **/usr/lib/arm-linux-gnueabihf/librtmp.so.1**.

Official support thread: http://forum.kodi.tv/showthread.php?tid=162307

More info: https://discourse.osmc.tv/t/replacing-librtmp-so-0-with-custom-version/2067

Alternative version by superceleron: http://bit.ly/SCLibrtmp (https://www.mediafire.com/folder/3623pdo81n353/lib)

===== Transmission =====

Install and prepare folders and permissions:
<code>
sudo apt-get install transmission-daemon
sudo systemctl stop transmission-daemon.service
mkdir -p /home/osmc/torrents/downloads
mkdir -p /home/osmc/torrents/temp
mkdir -p /home/osmc/torrents/watch
sudo chmod g+rwx /home/osmc/torrents/downloads
sudo chmod g+rwx /home/osmc/torrents/temp
sudo chmod g+rwx /home/osmc/torrents/watch
sudo usermod -a -G osmc debian-transmission
</code>

Edit the settings file **/etc/transmission-daemon/settings.json**:
<code>
"rpc-whitelist-enabled": false,
"rpc-username": "username",
"rpc-password": "password",
"download-dir": "/home/osmc/torrents/downloads",
"incomplete-dir": "/home/osmc/torrents/temp",
"incomplete-dir-enabled": true,
"script-torrent-done-enabled": true,
"script-torrent-done-filename": "/home/osmc/update-library.sh",
"trash-original-torrent-files": true,
"umask": 0,
"watch-dir": "/home/osmc/torrents/watch",
"watch-dir-enabled": true,
</code>

Create this script in **/home/osmc/update-library.sh**:
<code>
#!/bin/sh

/usr/bin/curl --silent --data-binary '{ "jsonrpc": "2.0", "method": "VideoLibrary.Scan", "id": "mybash"}' -H 'content-type: application/json;' http://nova:abaixardeTOT@localhost:8081/jsonrpc > /dev/null
</code>

Start the daemon:
<code>
sudo systemctl start transmission-daemon.service
</code>

References:
  * http://www.htpcguides.com/install-transmission-raspberry-pi-latest-version-raspbian/
  * http://posts.danharper.me/raspberry-pi-2-transmission/
  * http://raspberryfacil.com/instalar-transmission-en-osmc-kodi/
  * http://www.dennisjanssen.be/tutorials/raspberry-pi-media-center/
  * http://www.robertsetiadi.com/installing-transmission-in-raspberry-pi/

===== rtorrent + rutorrent =====
<code>
sudo apt-get install rtorrent
mkdir ~/.rtorrent.session
</code>

The configuration goes to **~/.rtorrent.rc**:
<code>
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

scgi_port = 127.0.0.1:5000

# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
max_peers = 100

# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
max_peers_seed = -1

# Maximum number of simultanious uploads per torrent.
max_uploads = 50

# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0

# Default directory to save the downloaded torrents.
directory = /home/osmc/torrents/downloads

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /home/osmc/.rtorrent.session

# Watch a directory for new torrents, and stop those that have been
# deleted.
#schedule = watch_directory,5,5,load_start=./watch/*.torrent
#schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=1000M

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
port_range = 55090-55090

# Start opening ports at a random position within the port range.
port_random = no

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no

# Set whether the client should try to connect to UDP trackers.
use_udp_trackers = yes

# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,enable_retry,prefer_plaintext

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
# 
dht = auto

# UDP port to use for DHT. 
# 
dht_port = 55091

# Enable peer exchange (for torrents not marked private)
#
peer_exchange = yes

# Enable logging
log.open_file = "rtorrent.log", (cat,/home/osmc/.rtorrent.log)
log.add_output = "notice", "rtorrent.log"

encoding_list = UTF-8
</code>

To launch at startup, create the following file **/etc/systemd/system/rtorrent.service**:
<code>
[Unit]
Description=rTorrent
After=network.target

[Service]
User=osmc
Type=forking
KillMode=none
ExecStart=/usr/bin/screen -d -m -fa -S rtorrent /usr/bin/rtorrent
ExecStop=/usr/bin/killall -w -s 2 /usr/bin/rtorrent
WorkingDirectory=/home/osmc

[Install]
WantedBy=multi-user.target
</code>

And enable at boot with:
<code>
sudo systemctl enable rtorrent
</code>

To compile from source:
<code>
sudo apt-get install rtorrent

wget https://raw.githubusercontent.com/rakshasa/rtorrent/master/doc/rtorrent.rc -O ~/.rtorrent.rc
</code>

<code>
sudo apt-get install automake build-essential libcppunit-dev libcurl3 libncurses5-dev libssl-dev libtool libxmlrpc-core-c3-dev pkg-config zlib1g-dev

mkdir -p ~/local/

cd ~/local/
git clone https://github.com/rakshasa/libtorrent.git
cd libtorrent
git checkout 0.13.6
./autogen.sh
./configure --prefix=$HOME/local --with-posix-fallocate
make
make install

cd ~/local/
git clone https://github.com/rakshasa/rtorrent.git
cd rtorrent
git checkout 0.9.6
./autogen.sh
export PKG_CONFIG_PATH="$HOME/local/lib/pkgconfig"
./configure --prefix=$HOME/local --with-xmlrpc-c
make
make install
</code>

  * http://forums.rutorrent.org/index.php?topic=256.0
  * http://forums.rutorrent.org/index.php?topic=4665.0
  * http://www.htpcguides.com/install-configure-rtorrent-and-rutorrent-on-debian/
  * https://crshd.github.io/2014/12/16/ruTorrent-Seedbox-on-Debian/
  * https://wiki.archlinux.org/index.php/RTorrent
  * https://github.com/Kerwood/rtorrent.auto.install/blob/master/Rtorrent-Auto-Install-1.1.0-Raspbian-Wheezy-Nginx
  * https://discourse.osmc.tv/t/rtorrent-for-app-store/5938
  * https://discourse.osmc.tv/t/howto-rtorrent-instead-of-transmission/6069
  * https://github.com/xombiemp/ultimate-torrent-setup
  * https://github.com/xombiemp/ultimate-torrent-setup/wiki#configure-the-gui-settings
  * http://community.rutorrent.org/RtorrentTroubleShooting
  * http://www.torrent-invites.com/seedbox-tutorials/252590-rutorrent-ratio-tutorial.html

===== Movies: CouchPotato =====
  * https://couchpota.to/

===== TV Shows: Sick Beard =====
  * http://sickbeard.com/forums/viewtopic.php?f=9&t=3661

===== TV Shows: SickRage =====
  * https://github.com/SiCKRAGETV/SickRage

===== TV Shows: Sonarr (NzbDrone) =====
  * https://sonarr.tv/
  * https://github.com/Sonarr/Sonarr/wiki/Installation#linux
  * http://www.htpcguides.com/install-sonarr-raspberry-pi-mono-310/
  * https://github.com/Sonarr/Sonarr/wiki/Autostart-on-Linux#systemd
  * https://discourse.osmc.tv/t/nzbget-couchpotato-and-sonarr/1681

===== HTPC Manager =====
  * http://htpc.io/

===== Browser Extensions =====
  * Firefox: [[https://addons.mozilla.org/es/firefox/addon/send-to-xbmc/|Send to XBMC/Kodi]]
  * Chrome: [[https://chrome.google.com/webstore/detail/play-to-kodi/fncjhcjfnnooidlkijollckpakkebden|Play to Kodi]]

===== Keyboard Layout =====
There seems to be a bug in OSMC where the external keyboard is always English and can't be changed.

Bug report: https://discourse.osmc.tv/t/bug-report-hardware-keyboard-layout-not-working/3507

===== Avoid sleep (blank screen) after a long time suspended =====
Go to My OSMC -> Pi Config and enable **store_hdmi_to_file**.

  * https://discourse.osmc.tv/t/screen-lost-after-a-night-of-running-without-tv/2280/5
  * http://kodi.wiki/view/Raspberry_Pi_FAQ#TV_is_not_detected_unless_powered_on_first

===== References =====
  * http://posts.danharper.me/raspberry-pi-2-installing-raspbian/
Doxbo

User Tools

Site Tools

Page Tools
